Selecting The Function Mode - Stahlwille 701 Manual De Instrucciones

Using the torque wrench

Selecting the function mode

The following function modes can be used:
 Track: display mode with momentary value
display
 Peak: display mode with peak value display
 User: function mode defined in the
SENSOMASTER software (this function mode is
only displayed if a user bolting type has been
created with the SENSOMASTER software and
transferred to the torque wrench.)
"Peak" function mode is set in the factory.
 Switch the torque wrench on.
The currently set function mode is displayed.
Proceed as follows to change the function mode:
 Press the operating button briefly twice in
succession.
The next possible function mode is displayed and
set.
 Press the operating button briefly twice in
succession again.
If no bolting type is stored in the torque wrench, the
originally set function mode is now displayed and
set again.
If a bolting type is stored in the torque wrench,
"User" function mode is now displayed.
The set function mode remains set even after
switching off.
18