Device Characteristics - Stahlwille 701 Manual De Instrucciones

Description

Device characteristics

Characteristics of the torque wrench:
 Black/white graphical display with LEDs arranged
alongside
 SENSOMASTER software for configuring the
torque wrench and for exporting the data including
 Three function modes
 Track (display mode with momentary value
display)
 Peak (display mode with peak value display)
 User (execution of defined bolting type, in
combination with the SENSOMASTER software
only)
 Micro USB interface
 Bayonet lock for battery compartment
 Data storage (≤2500 bolting processes)
 Adjustable tolerances (with user function mode in
combination with the SENSOMASTER software
only)
 Acoustic and optical evaluation of the bolting type
(with user function mode in combination with the
SENSOMASTER software only)
 Values and parameters are stored electronically.
 Overload protection through acoustic, tactile and
optical warning signal
 Automatic indication of the next calibration date
according to time and/or number of cycles
(optionally available in combination with the
SENSOMASTER software, not active on delivery)
 Calibration and adjustment with the following
STAHLWILLE calibration and adjustment
facilities:
 perfectControl 7794-1
®
 perfectControl 7794-2
®
 perfectControl 7794-3
®
 Manutork 7791
®
 Various units can be set
(N‧m, cN‧m, ft‧lb, in‧lb).
 After relieving the torque wrench, it is immediately
functional again
10
 Tightening to the right and left is possible.
 The torque is shown on the display.
 Measurement is carried out irrespective of the
force application point.
 Safe handling thanks to an ergonomically shaped
handle. The correct gripping position can be seen
and felt
Various functions and settings are only possible
in combination with the enclosed
SENSOMASTER software. Notes on operating
and using the SENSOMASTER software can
be found in the separate software instructions.