Selecting Units - Stahlwille 701 Manual De Instrucciones

Using the torque wrench
CAUTION
Risk of injury due to slipping.
 Make sure you are standing securely
whilst using the torque wrench.
 Ensure adequate freedom of
movement when using the torque
wrench.
CAUTION
Risk of injury due to overloading the
torque wrench.
 End the tightening procedure when
the desired torque is shown on the
display.
ATTENTION
Damage to the measuring elements of
the torque wrench possible.
 Protect the torque wrench e.g.
against hard jolts or dropping.
 Switch the torque wrench on.
 Select the desired unit for the torque.
 Select the desired function mode.
 Make sure that the socket is fastened correctly
and engaged securely on the torque wrench.
 Only actuate the torque wrench using the handle.
 Grip the handle centrally.
 Tighten tangentially to the swivelling radius and at
right angles to the bolting axis.

Selecting units

The following units can be selected for the torque:
 N‧m,
 cN‧m,
 ft‧lb,
 in‧lb.
The unit N‧m is set in the factory.
 Switch the torque wrench on.
The unit currently set for the torque is displayed.
Proceed as follows to change the displayed unit:
 Press the operating button briefly three times in
succession.
The next possible unit is displayed and set.
 Repeat pressing the operating button three times
until the desired unit is displayed.
The selected unit remains set even after switching
off.
17