Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Safety
Safety
Proper use, operating area
The electronic torque wrench 701 is used for
measuring torque values during the controlled
tightening and release of threaded connections in
the workshop area. To do this, an appropriate
socket must be connected to the torque wrench.
Never exceed the maximum limit torque of 125 % of
the nominal value.
Proper use additionally includes:
Compliance with all of the notices contained in
these operating instructions, particularly the safety
instructions
Observance of and compliance with the relevant
accident prevention regulations of the responsible
trade association and all other applicable safety
regulations .
Any other use is regarded as improper.
EDUARD WILLE GMBH & CO. KG accepts no
liability for damage arising as a result of this.
6
Basic safety instructions
The torque wrench is a precision tool and must
accordingly be handled with care. Avoid
mechanical, chemical or thermal influences which
exceed the stresses involved in proper use.
Make sure that extreme climatic conditions such as
cold, heat and humidity are unable to influence
accuracy.
Do not overload the torque wrench. Adhere to the
measuring range data on the model plate under all
circumstances. The torque wrench may otherwise
be damaged.
Avoiding risks of injury
Do not use the torque wrench as an impact tool.
Check the torque wrench and all accessories for
damage prior to use. Never use a damaged
torque wrench or damaged accessories.
Batteries and small parts such as e.g. bits must
be kept out of the reach of children. Children may
put these into their mouths and swallow them.
Never expose the torque wrench to rain, moisture
or other fluids. Ingressing fluids can cause
incorrect measured values and therefore unsafe
threaded connections.
Do not use the torque wrench in aggressive
atmospheres. An ingressing aggressive
atmosphere can cause incorrect measured values
and therefore unsafe threaded connections.
Tabla de contenido
