Pacojet 2 PLUS Manual De Instrucciones página 41

Problem
1
2
Cause
Pacotizing beaker overfilled.
Dropping of the processing
tool in repeat mode has
been detected.
Measure
To limit the consequences of
overfilling, the Pacojet 2 PLUS
is equipped with a control
and assistance function. If the
beaker is overfilled an error
message will be displayed
Pacotizing is done in as much
free space that is available in
the filled pacotizing beaker.
Thereafter, the pacotizing
shaft moves to the start
position. You are prompted
to remove the pacotized cont-
ent .
2
1.) Unscrew protective outer
beaker (12) and pacotizing
beaker (10) and remove (see
chapter: "8.3 After pacoti-
zing" on page 29).
2.) Completely remove food
residues from the processing
tool, including the blade
head, blade holder and insert.
3.) Replace the processing
tool, splash guard (8), protec-
tive outer beaker and paco-
tizing beaker on the Pacojet
2 PLUS (see chapter "8.2
Pacotizing" on page 23).
4.) Repeat the programming
and start the processing.
When reprogramming,
take already processed food
preparations in the pacotizing
beaker into account.
41
EN
.
1