Pacojet 2 PLUS Manual De Instrucciones página 36

EN
1
2
1
7.
2
8.
9.
10.
11.
36
Note
Damage to property caused by incorrect use
of the protecti ve/pacoti zing beakers!
• Never att ach the protecti ve outer beaker (12)
without fi rst inserti ng the pacoti zing beaker (10).
Att ach the protecti ve outer beaker (12) with the paco-
ti zing beaker (10) to the Pacojet 2 PLUS.
To do this, slide the upright protecti ve outer beaker
with pacoti zing beaker upwards into the rounded
mold on the base to center it.
Make sure that the handle is pointi ng to the right in
the starti ng positi on and that the top of the pacoti zing
beaker is fl at on the appliance.
Turn the protecti ve outer beaker from right to left
unti l the stop into the holder.
The handle will point forwards when the protecti ve
outer beaker is att ached correctly.
Press the START BUTTON (20). The rinse cycle starts.
Remember that the appliance needs to be in "ope-
rati ng mode" for this (see "START BUTTON" on page
16).
During the rinsing process, the depressurizati on hose
should be fl ushed through. To do this, briefl y press the
depressurizati on butt on (SELECTOR butt on (17) - bot-
tom right) when the pacoti zing blade (9) moves up. Be
sure to place a container under the end of the depres-
surizati on hose (4).
Aft er the rinse cycle has been completed (the motor
stops) and automati c depressurizati on appears in the
adjoining display with a green checkmark.
Remove the protecti ve outer beaker (12) with the pa-
coti zing beaker (10).
To do this, turn the protecti ve outer beaker approxi-
mately 90° to the right and slide it out at the bott om .
Aft er the protecti ve outer beaker with pacoti zing
beaker has been removed, the display switches back
to the main menu.