Pacojet 2 PLUS Manual De Instrucciones página 28

EN
4.5
9.
2.2
28
Start the pacotizing process by pressing the START
BUTTON (20).
The motor starts and sets the pacotizing shaft with
blade holder (2), and pacotizing blade (9) in motion.
The vertical movement of the pacotizing blade is
shown in the display by means of a green arrow.
Partial quantities that are being processed are dis-
played in green (example: 2.2 portions).
Once the pacotizing process is complete, the pacoti-
zing shaft and blade holder retracts with the pacoti-
zing blade to the start position and comes to a stop.
The motor switches off and the following values
are shown clearly in the display: (a) center, the
number of effectively processed portions (example:
2.2 portions); (b) top left, the number of desired por-
tions that were programmed at the beginning of the
process (example: 4.5 portions); (c) bottom left, the
number of repetitions that were performed (example:
1 repetition of a total of 1 programmed repetition).
If necessary, the pacotizing process
can be interrupted or stopped at any
time by pressing the STOP/RESET but-
ton (21). In this case, the pacotizing
shaft (2) retracts to the start position.
See also chapter "5.3 Control panel" on page 16.