Pacotizing - Pacojet 2 PLUS Manual De Instrucciones

8.2

Pacotizing

1.
Switch on the Pacojet 2 PLUS at the MAINS SWITCH
(6): the appliance switches to "operating mode".
Pacojet 2 PLUS is ready for use.
Repeat function not available.
If the combination of spray guard and
processing tool is attached to the ap-
pliance before it is turned on, the
repeat function is not available.
2.
•
•
Before completing this step, make sure that the preli-
minary scraper (8a) is attached to the spray guard and
that the lip of the scraper is pointing towards the pa-
cotizing blade. Insert the pacotizing blade (9) into the
spray guard (8) by inserting the head of the pacotizing
blade into the hole in the spray guard.
While doing so, make sure that the flat side of the
spray guard is pointing downwards towards the paco-
tizing blade.
3.
Note
Damage to property caused by incorrect
attachment of the pacotizing blade to the
spray guard!
• Never attach the combination of the pacotizing
blade (9) and spray guard (8) to the protective
outer beaker (12)/pacotizing beaker (10) before
processing. This can result in damage to the
appliance and its accessories.
• Always properly attach the pacotizing blade and
spray guard combination to the blade holder
of the pacotizing shaft (2) before attaching the
protective outer beaker.
Caution
Risk of injury due to incorrect
handling of the pacotizing
blade!
Never touch the sharp edges
of the pacotizing blade (9).
Always hold the pacotizing blade
with two fingers at the corners
between the blades.
23
EN