SHERCO 125 ST Manual Del Propietário página 95

MAINTENANCE PROCESSES
H
G
9
Reassembling the spring.
- Put the proper spring in place.
- Put ring
- Compress the spring to put clip
- Tighten adjustment nut
recommended setting (p.93).
- Maintain adjustment nut
locknut
- Put the shock absorber in place on the left side.
- Put the shock absorber head screw
as well as strut
- Put the shock absorber foot screw
and tighten it.
Shock absorber foot screw M8
Adjust the muffler support foot
screw
10
Muffler support screw M6
- Put the shock absorber head nut in place and
tighten everything.
Shock absorber head screw M8
- Put the fuel tank in place.
- Put the air filter housing in place.
in place.
J
until reaching the
H
H
.
G
and muffler support foot
E
.
B
in place.
I
and tighten
in place,
F
.
D
in place
A
25Nm
, tighten
D
10Nm
25Nm
95