8-15-2 Replacing the Xenon Drive PC Board
PC Boards can be easily damaged by static electricity. To prevent static
damage, service personel should touch an earthed metal part of the game to
discharge any static they may have built up before touching the PC Board.
When installing the fibre optic, be careful not to touch the Xenon tube with your
fingers or hands. If the Xenon tube is accidentally touched, clean the area
touched with alcohol. (Part No 95000031)
1.
Remove the Xenon Assy.
2.
Disconnect the 3 connectors.
3.
Using needle nosed pliers, squeeze the locking tabs of the locking supports, one
at a time, to release the PC Board. Remove the Xenon PC Board.
Xenon PC Board
Xenon Tube
Xenon Drive
PC Board
How to disengage
locking support
PC Board
Locking Support
Stopper
4.
Reassemble in reverse order.
(see 8-15-1 page 84)
Needle-Nosed
Pliers
Page 86
Locking Supports
Locking Supports
Connectors