Replacing The Xenon Pc Board - NAMCO bee panic Manual Del Operador

8-15-1 Replacing the Xenon PC Board

PC Boards can be easily damaged by static electricity. To prevent static damage,
service personnel should touch an earthed metal part of the game to discharge
any static they may have built up before touching the PC Board.
1. Remove the Play Panel.
2. Remove the Cover from the Xenon Assy. Remove the Fibre-Optic from the
holder. (see 8-14-1 page 77)
3. Loosen 2off cap screws (M4x10), disconnect the 3 connectors, and remove the
Xenon Assy.
Connectors
Xenon Assy
Connector
(see 8-10 page 69)
Page 84
Cap screws (M4x10)
(to be loosened only)