Removing The Target Assemblies - NAMCO bee panic Manual Del Operador

8-3

Removing the Target Assemblies

1. Remove the Upper Rear Door.
2. When removing the The Target Assemblies at either end, remove 3off pozi head
screws (M5x12) and remove the Side Cover, then remove 2off cap screws
(M5x12) to remove the Guard.
Target Assy
3. Disconnect the 2 connectors.
4. Remove the Lamp Base by pressing down on the latch and tilting the Lamp Base
forwards.
Target Assy
Cap screw (M5x12)
Guard
Lamp Base
Connectors
Page 60
Pozi head screw (M5x12)
Side Cover
Latch