Input Test; Dispensing Operation Counter; Selecting Operation Counter - NAMCO bee panic Manual Del Operador

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 10
7-2-2

Input Test

(I
When this test is selected, the following switches and sensors can be checked.
To discontinue this test and step to the next test press the Select switch.
Each time a credit signal is sent from the CashFlow, a sound is produced and the
number shown on the 7-segment display of Target Assy 6 increments by one
from "00" to "99".
Each time the Service switch is pressed, a sound is produced and the 7-segment
display of Target Assy 7 shows "88".
When Selection switches 1 and 2, or the Challenge switch is pressed, the
corresponding switch lamp illuminates.
When Prize Sensors 1~5 are activated, the 7-segment display on the
corresponding Target Assy 1~5, shows "88" for one second.
When any of the Target Sensors 1~10 are activated, (by aiming and firing the
gun at the target), the red lamp on the corresponding Target Assy illuminates for
one second.
7-2-3

Dispensing Operation Counter

When this test is selected, the 7-segment displays on the Target Assys 1~3 shows the
number of dispensing operations for each Payout Assy.
To discontinue this test and step to the next test press the Select switch.
While this Test is selected, the Selection switches 1 and 2 and the Challenge
switch are illuminated.
Press one of the Selection switches or the Challenge switch. The lamp of the
selected switch will turn off, and the 7-segment displays of Target Assys 1~3 will
show the number of operations of the selected Payout Assy.
(Target Assy 1 indicates the 6th (1xx,xxx) and the 5th (x1x,xxx) digits, Target Assy
2 indicates the 4th (xx1,xxx) and 3rd (xxx,1xx) digits, and Target Assy 3 indicates
the 2nd (xxx,x1x) and 1st (xxx,xx1) digits.)
7-2-4

Selecting Operation Counter

When this test is selected, the 7-segment displays on the Target Assys 1~3
shows the number of times each Payout Assy has been selected at game start.
To discontinue this test and step to the next test press the Select switch.
While this Test is selected, the Selection switches 1 and 2 and the Challenge
switch are illuminated.
Press one of the Selection switches or the Challenge switch. The lamp of the
selected switch will turn off, and the 7-segment displays of Target Assys 1~3 will
show the number of operations of the selected Payout Assy.
(Target Assy 1 indicates the 6th (1xx,xxx) and the 5th (x1x,xxx) digits, Target Assy
2 indicates the 4th (xx1,xxx) and 3rd (xxx,1xx) digits, and Target Assy 3 indicates
the 2nd (xxx,x1x) and 1st (xxx,xx1) digits.)
c c c c c
)
(p p p p p
(s
Page 46
n n n n n
)
)
n n n n n
Tabla de contenido
loading

Tabla de contenido