Replacing The Prize Sensors; Lengthwise Front - NAMCO bee panic Manual Del Operador

8-12

Replacing the Prize Sensors

8-12-1 Lengthwise Front

1. Remove the Play Panel.
Connectors (4-pin)
2. Remove 2off cap screw (M4x16)
3. Disconnect the 3 connectors, and detach the Sensor Bracket (B)
Flat washer (M3)
Cap screw (M3x12)
4. Remove 1off cap screw (M3x12), flat washer (M3) and hex nut (M3) from the
Sensor. Replace the Sensor.
5. Reassemble in reverse order.
Note: Ensure that the front Prize Item Sensors have 4-pin connectors. (light
receiving)
(see 8-10 page 69)
Cap screw (M4x16)
Sensor Bracket (B)
Hex nut (M3)
Prize Sensor
(with 4-pin connector)
Sensor Bracket (B)
Page 71