Removing The Play Panel - NAMCO bee panic Manual Del Operador

8-10

Removing the Play Panel

1. Open the Hood, and remove the Fluorescent Lamp. (For safety and to prevent
damage to the Fluorescent Lamp).
2. Remove 3off security screw (M5x12), 2off security screw (M5x20) and 2off whizz
nuts (M6).
Play Panel
Security screw (M5x12)
3. Lift the Play Panel only sufficient to gain access to the connector.
4. Disconnect the connector and remove the Play Panel.
Play Panel
5. Reassemble in reverse order.
Security screw (M5x20)
Speaker
Page 69
Whizz nut (M6)
Connector