Moving The Machine; Separating The Cabinet - NAMCO bee panic Manual Del Operador

4. MOVING THE MACHINE

l
This equipment is fitted with castors to make it easier to move. Take care when
moving the equipment on an inclined floor.
l
The overall height of this equipment is 2240mm. Take care of any overhead
obstructions. (e.g. Light Fittings, Electric Cables etc.)
4-1

Separating the Cabinet

i
The Upper Cabinet weighs approx. 30kg. Ensure that at least
two (2) people are used to separate the cabinets.
1. Remove 2off pozi head screws (M5x30) and remove the rear lower maintenance
panel.
2. Disconnect the four connectors.
3. Remove 4off button head screws (M8x30) with washers.
Washer
Socket
button-head screw
(M8x30)
Lower cabinet
Connectors (4)
Page 31
Socket
button-head
screw (M8x30)
Washer