8-13-3 Replacing the Payout Motor
1.
Remove the Payout Assy.
2.
Remove 2off cap screws (M4x10) and detach the Guide Base.
Payout Motor
3.
Loosen 1off double point screw (M4x8).
4.
Remove 4off cap screws (M4x10) and remove the Payout Motor.
Payout Motor
5.
Reassemble in reverse order.
(see 8-13-1 page 74)
Guide Base
Cap screw (M4x10)
Double point screw
(M4x8)
Cap screws (M4x10)
Page 76