Replacing The Steering Motor Or Drive Belt - NAMCO WANGAN MIDNIGHT Manual Del Operador

8-11 Replacing the Steering Motor or Drive Belt

1. Remove the steering assembly.
2. Slacken the adjustment screw (hex head M6x60).
3. Slacken the 4off hex nuts (M5) to remove the tension from the belt.
Hex head screw (Mx60)
Hex nut (M5)
4. Replace the drive belt.
5. Remove 4off hex nuts (M5) and replace the Motor.
6. Refit (finger tight) the 4off hex nuts (M5)
7. Tighten the adjustment screw (M6x60) to tension the belt correctly.
Note: Do not over tension the drive belt.
8. Retighten the 4off hex nuts.
9. Refit the steering assembly.
Note: After replacing the drive belt ensure that the game is re-initialized.
section 7 page 59)
(see 8-9 page 72)
Belt
Page 74
(see