Replacing The Gun Assemblies - NAMCO VAMPIRE NIGHT DX Manual Del Operador

7-7

Replacing the Gun Assemblies

1. Remove the Switch Panel Assy.
2. Disconnect the connector.
3. Remove 2off Whizz nut (M4) and remove the Rope Hoop.
4. Remove 2off Whizz nut (M6) and remove the Gun Assy.
Connector cover Assy
Rope hoop
5. Reassemble in reverse order.
Note: Always reinitialize the guns if the guns has been removed or replaced.
(see 6-2-3-1 page 47)
(See 7-5 page 65)
Gun Assy
Underside of Play Panel Assy
Page 67
Gun bracket support plate
Whizz nut (M6)
Whizz nut (M4)
Connector