4.
MOVING THE MACHINE
This machine is fitted with castors to make it easier to move. Take
l
care when moving the machine on an inclined surface.
The overall height of this machine is 1990mm. Take care of any
l
overhead obstructions. (e.g. Light Fittings, Electric Cables etc.)
When moving the game , ensure that the game is dis-assembled
l
into 4 parts: Monitor Cabinet, Header Assembly and Seat
Assemblies.
5.
INSTALLATION
Notes on Installation
WARNING
WARNING
WARNING
CAUTION
NOTE
•
NEVER turn the power to the machine ON until installation
has been completed.
•
In order to prevent possible electric shocks, be sure that the
machine is connected to the mains with a securely connected
earthed plug.
•
So that customers are not injured , ensure that there is at
least 500mm separation between other machines or walls.
•
In order to avoid damage to the machine due to mis-operation,
ensure that the voltage of the mains supply is 230volts AC.
•
If the location site of this machine has a polished floor it is
recommended that rubber pads are fitted under the level adjusters
to prevent the machine sliding on the floor.
•
In order to gain access to the Power Supply and CPU assemblies,
make sure that the rear of the machine is separated from a wall
or other machine by at least 500mm.
•
When installation is complete, it is imperative that the game is
initialized.
(See section 7 page 59)
Page 32