cecotec BREAD&CO 1500 PERFECTCOOK Manual De Instrucciones página 26

ENGLISH
Dough
For preparing yeast dough for buns, pizza crust, etc. to be baked in a conventional oven. There
is no baking in this program.
Pasta dough
For mixing flour and water.
Yoghurt
For rising and making yoghurt.
Jam
Use this setting for making jams from fresh fruits. Do not increase the quantity or allow the
recipe to boil over the bread container into the baking chamber. Should this happen, stop
the machine immediately and remove the bread container carefully. Allow to cool and clean
thoroughly.
Bake
For additional baking of bread when required because it is too light or not cooked enough. In
this program there is no kneading or resting.
Customised bread
Press this button to customise the duration of all the functions (e.g. kneading, rising, baking,
keeping warm, etc.).
Crust colour
Press the Crust colour button to select the desired setting: Light, Medium or Dark. This setting
can be adjusted under program 1-8, 14-15. The default crust colour is medium.
Weight
Press the Weight button to set the weight of the ingredients to be cooked or processed: 1000
g, 1250 g, 1500 g. This setting can be adjusted under program 1-8.
Timer
Use the timer function to set the start of the bread making process at the desired time. Use
the arrow buttons to increase or decrease time shown on the display by 10 minutes. It can be
set up to a maximum of 15 hours, including the delay time and the bread making program.
Notes:
The delay time must be set after selecting the program menu, weight and crust colour.
Do not use the timer function with recipes that include dairy or other ingredients, such as
eggs, milk, cream or cheese.
Use the arrow buttons to select how long it will be before bread is ready. The set time must
include the baking time of the program.
50 BREAD&CO 1500 PERFECTCOOK
Keep warm
Once a program is completed, use this function to keep the bread warm.
Tip: We recommend that the room temperature where the device is going to be used is
between 15 and 34 ºC. If the temperature is higher, the bread will taste acid and if it is lower, it
may affect the bread's rising process.
Power interruption
In the event of a power outage, the process of making bread will continue automatically
within 10 minutes. If the power outage is longer than 15 minutes, the device will not resume
the program and the display will return to the default settings.
If the dough has started rising, discard the ingredients in the bread container and start over. If
the dough has not entered the rising process when power is cut, press the Start/Stop button
to continue the program from the beginning.
Errors/warnings
"HHH" – Temperature inside the bread container is too high. Press the Start/Stop button to
stop the program and unplug the power cord. Open the lid and allow the device to cool down
for 10-20 minutes before using it again.
"EEO" – Temperature sensor is disconnected. Press the Start/Stop button to stop the program
and unplug the power cord. Contact the Technical Support Service of Cecotec.
Using the bread maker
Using the bread container handle, turn the brad container anticlockwise and pull it out of
the appliance.
Fix the kneading blade onto the drive shaft inside the bread container.
Measure and add ingredients to the bread container in the order listed in the recipe. First add
liquids, then the solid ones.
Note: Make a small indentation on the top of flour with finger, add yeast into the indentation.
Make sure that yeast does not come into contact with salt or liquids.
Place the bread container into the bread maker and make sure it is firmly locked in place by
turning it clockwise. Close the lid then plug the appliance into a power supply.
Press the Crust's colour button to select the desired setting: Light, medium or dark crust.
Press the Weight button to select the desired weight.
Press the Timer button to set a timer for one of the functions. Use the "+"/"-" buttons to
increase or decrease the time shown on the display. This process can be skipped.
Press the Start/Stop button once to start the program. The device will beep and "3.00" will be
displayed. The colon between the digits will remain steady. The light indicator will turn on.
The kneading blade will start mixing ingredients.
If the program requires additional ingredients to be added, it will beep 10 times. Open the
lid and pour the ingredients (fruits, nuts, chocolate...). The time of adding ingredients will
depend on the program or recipe.
ENGLISH
BREAD&CO 1500 PERFECTCOOK 51