Resetting The Printer - HP LaserJet II Serie Manual De Instrucciones

HP 33440/HP 33449 COMBINED SERVICE MANUAL
Resetting the Printer
The printer an be reset in three different ways:
Pressing the
CONTINUE/RESET
key until 07 RESETis displayed or sending an 'c E resets the
printer to the values the user has selected through the Printing Menu.
Pressing the
~ENTER/RESET MENU]
key until 09 MENU RESETis displayed resets the printer and all
Printing Menu items to the factory default setiings.
Performing a COLD RESET(or "Cold Start") operation resets the printer and menu items to
factory default Printing and Configuration Menu settings. (See "Cold Reset Routine.")
Most sotiare automatidly sends the 'c E command (the RESET command) before and after
each job. With some sotiare packages, this command may need to be sent by the user from the
computer or a Control Panel RESET routine may need to be performed before sending a new j ob
to the printer. Resetting the printer ensures that the Printing Menu settings from the Control
Panel are used. If these settings are changed often or if printer commands that affect page format
are sent, the printer may need to be reset to make sure that the desired settings are in use. (Note:
any tempora~ fonts and temporary macros are dso cleared when resetting the printer.)
Ordinarily, sohare tin perform any necessary printer reset for the user. Note that a Control
Panel reset will cl-r (rather than print) any buffered data in the printeds memory.
Reset Menu Routine
Holding down the
(RESET MENU)
key at least two seconds until 09 MENU RESETis displayed returns
Printing Menu settings to factory default setiings and puts these setiings in effect. It also clears
temporary soft fonts, temporary macros, and any stored page dati.
Cold Reset Routine
A "COLD RESET" returns dl Printing Menu and 1/0 Configuration Menu items to their factory
default settings. "COLD RESET" does not reset the page count or envelope cassette size (or, for
the HP 33449, display language) settings which are dso stored in non-volatile RAM. A "COLD
RESET" is performed by holding down the ~-) key while powering on the printer. 08 COLD
RESET(not iodized for HP 33449) is displayed for one second, followed by the power-on SELF
TEST message. The actual "COLD RESET" is performed immediately tier the display shows 00
READY, a nd, afterward, the printer must be put on line by the user. Since 1/0 confiWration values
have been reset to factory defaults, proper settings should be verified before placing the printer on
line.
3-13