HP LaserJet II Serie Manual De Instrucciones página 182

HP 33440/HP 33449 COMBINED SERVICE MANUAL
Table 7-2. Printer Messages (continued)
3C LOAD [envelope size]
?C LOAD [paper size]
PE FEED [envelope size]
]r
PE FEED E~LOPE
PF FEED [paper size]
E~LOPE = [env. size]
{HP 33440)
A user request has been made for an envelope size not currently
instiled in the printer or the tray is out of envelopes. Load the
correct envelope in the envelope tray. Insert a loaded tray and
select the loaded envelope size from the Control Panel or press
~ to override. If the problem continues, see the "ii PAPER
OUT Message" section. (Table 7-5)
([Envelope size] may be one of the following coMio, MONARC, C5 or
DL.)
This message is displayed whenever there is a user request for a
paper size that is not currently installed in the printer (per the
Tray Size mitches) or the input tray is out of media. Insert the
proper loaded tray into the printer or press {-) to override.
If the problem persists, see the "ii PAPER OUT Message" section.
(Table 7-5)
([Paper size] may be one of the following A4, EXEC,LETTER, or
LEGAL.)
A user request has been made to manually feed an envelope of
the indimted size. Feed the envelope through the manual feed
slot or press (-~ to feed from the tray. If the manual feed
operation is not working as expected, perform the "Manual Feed
Sensor (PS302) Functional Check' described in this section.
A user request has been made to manually feed paper of the
indicated size. Feed paper through the manual feed slot or press
~
to
feed from the tray. If the manual feed operation
is not working as expected, perform the "Manual Feed Sensor
(PS302) Functional Check" described in this section.
This message is displayed whenever an envelope tray is insetied in
the printer.
The user must tell the printer what size envelopes are being used
by scrolling through the choices (using the ~ and ~ keys)
and pressing the ~-j key to make the new selection. Press
~~j or ~~j to proceed. If an envelope tray is not being
used when this message occurs, reseat the tray. If the problem
continues, see "Tray Size Switches Functional Check" in this
section. ([Envelope size] may be one of the following COM Io,
MONARC, C5 or DL.)
7-18