HP LaserJet II Serie Manual De Instrucciones página 161

HP 33440/HP 33449 COMBINED SERVICE MANUAL
TOP COVER HINGE BRACKET PLATES
1.
2.
3.
4.
Remove the Top Cover Assembly from the printer.
If the Hinge Assemblies are still attached to the Top Cover Assembly (see Figure 6-39), remove
them (4 screws, 2 on each Hinge Assembly).
Remove the Delivery Assembly.
Remove the remaining screws (2 each) securing the Hinge Bracket Plates to the Top Cover
Assembly and lift them out of the printer.
When reinstiling, note that the Hinge Plate with the coil spring must mount on the left side of
the Top Cover Assembly as viewed from the front of the printer.
Top Cover
Assembly
LE~
RIGHT
Screw
ew
ew
Screw
Figure 6-48. Hinge Plate Removal
6-52