2-1. I Ntroduction; 2-2. S Ite Requirements - HP LaserJet II Serie Manual De Instrucciones

HP 33440/HP 33449 COMBINED SERVICE MANUAL
2-1. I NTRODUCTION
HP 33440 and HP 33449 printers are mrefnlly adjusted and inspected before they are shipped.
To maintin the performance level set at the factory, correct selection of a location is ~remely
impo~nt. The service representative should filly understand the functions of the printers to
ensure selection of a suitable lomtion.
2-2. S ITE REQUIREMENTS
The HP 33440 and HP 33449 printers are designed to operate in a clean environment, preferably
in an area not subject to excessive mechanid shock, vibration, or a wide range of temperatures.
Mthough air conditioning and power conditioning are not required to ensure reliable operation,
the environment specifications listed in Chapter 1, Section 1-3, should not be exceeded.
The following suggestions should be taken into consideration prior to instigation
The printer should not be instiled near water faucets, humidifiers, refrigerators, or similar
devices that affect the environment. A location where the temperature changes abruptly, such as
near an air conditioner, should dso be avoided.
The printer should not be exposed to open flames, dust, ammonia fnmes, and direct sunlight or
other excessively bright light source at anytime.
The room should be well ventilated.
The printer should be intiled on a sturdy, level surface.
Stilcient space should be protided to permit unimpeded printer operation and adequate
ventilation (see Figure 2-l).
57" (144 cm)
+
22"
4
I
8" (20 cm)
m
(55 cm)
*
I
8" (20 cm)
Figure 2-1. PrinterSpace Requirements
2-3