HP LaserJet II Serie Manual De Instrucciones página 151

HP 33440/HP 33449 COMBINED SERVICE MANUAL
Exit Sensor Arm .
1. Remove the Fusing Assembly (4).
2.
3.
Remove the Etit Sensor PCA cover (1) and the screws (2) securing the Ht Sensor PCA to the
Fusing Assembly.
Remove the brass-colored screws (2) securing the ~t Shutter Arm Assembly Oocated on the
lower ba~ side of the Fusing Assembly), remove the assembly from the retaining pins, and
care~y pop the Etit Sensor Arm off the assembly.
Pun the Ht Sensor Arm (~ag) out the side of the unit.
4.
—
caution
When rephcing the brass-coIored screws, be carefnl not to strip them, they should
be snug but not hig~y torqued.
Exit Sensor Arm
Figure
6-37.
Exit Sensor
Arm
6-42