HP LaserJet II Serie Manual De Instrucciones página 340

HP 33440/HP 33449 COMBINED SERVICE MANUAL
Was your computer or printer on when you connected your interface cable?
- Turn off your computer and printer, wait 15 seconds, and turn them on again. Continue with
@
Is the interface port configured correctifi
- Your cable may not be connected to LPT1 for a parald interface or COM1 for a serial
interface. Try working through ~, ~, and @ again subsdtuting LPT2 Kyou have a parallel
interface, or COM2 if you have a ser~ interface.
Are all of the cables and power cords attached propedfi
- Check all of the connections.
Is the ON LINE indicator on the printer control panel lit?
- If not, press the ON UNE key.
Is the printer working propeti~ Run the self-test describd in~.
- If necessa~, mll your HP Dealer or HP Sales Representative.
Is your computer working properf~
- Run an application that works.
- If necessa~, call your computer dealer or manufacturer.
Have you setup the control panel proped~
- Hold down the MENU key for about 7 seconds until the Configuration Menu appears in the
display window. Then step through the configuration settings.
If necessary, repeat ~for a parailel interface or Q and @ for a serial intetiace, and continue
through the rest of this Road Map.
Have you setup your AUTOEXEC.BAT file properffi
- Type
TYPE A~E~C. ~T
on your computer and press @.
Check
the listing for
errors in the line or lines you added.
If necessary, repeat ~, @ , and ~.
DO you
have the correct printer caMe?
Check ~ for a parallel intetiace or Q and @ for a serti interface.
- If necessa~, obtain the correct cabfe.
Consult your LaserJet series II User's
Manual.
Call the HP Dealer from whom you
purchased your LaserJet series Il.
Call Hewlett-Packard's Personal
Peripherals Assist Line for help.
I@
I
1
7:00 a.m. to 6:00
p.m. Mountain time
(7:00 a.m. to 4:00 p.m. Wednesday)
Enter your Dealets number here:
A-17