This manual is for use only by technical personnel qualified to carry out the installation
no information given in this manual can be considered of any interest to the end user!
INDEX:
IMPORTANT NOTICE:
It is our duty to remind you that you are carrying out operations on machine systems classified in the "Automatic gates and doors"
category and as such are considered particularly "Hazardous"; it is your job to make them as "Safe" as is reasonably possible!
Only qualified, expert personnel must carry out the installation and any servicing required, making the best possible job of it and
in accordance with the following laws, standards and directives (norms, decrees of the President of the Republic and law decrees
are only valid for Italy; EEC Directives are, on the other hand, applicable for the whole of Europe):
UNI 8612 standard
DPR N° 46 of 5/03/1990
Dlgs N° 459/96 of 24/07/96 (EEC directive 89/392, Machine Directive)
Dlgs N° 615/96 of 12/11/96 (EEC directive 89/336, Directive on Electromagnetic Compatibility)
Dlgs N° 626/96 of 26/11/96 (EEC directive 93/68, Low Voltage Directive)
When designing and producing its products, Nice observes (as regards the equipment) all the above standards but it is of
paramount importance that the installer too (as regards the systems) strictly observes the same standards.
Unqualified personnel or those who do not know the standards applicable to the "Automatic gates and doors" category:
Must under no circumstances carry out installations and systems
Whoever carries out systems without observing all the applicable standards:
Will be held responsible for any damages that the system may cause!
Page 12
Page 13
Page 13
Page 14
Page 14
Page 15
Page 16
Page 16
Page 16
Page 17
Page 18
Page 18
Page 19
Page 19
(Motorised gates and main doors: construction criteria and protection devices against accidents)
(Standards for the safety of electrical installations, authorised personnel)
English
11