Porsche Mobile Charger Plus Manual De Instalación Y De Instrucciones página 46

Operating Manual
DE
Indicator lights
The
EN CHARGE STATUS
The
DOMESTIC CONNECTION
FR
lights up red.
The indicator light lights up red.
IT VEHICLE
ES
PT
NL
The CHARGE STATUS
SV
The
DOMESTIC CONNECTION
flashes red.
FI
The
CHARGE STATUS
DA
The indicator light lights up red.
VEHICLE
NO
The
EL CHARGE STATUS
The indicator light lights up red.
CHARGER
CZ
HU
The
CHARGE STATUS
The indicator light flashes red.
CHARGER
PL
HR
The
CHARGE STATUS
SR
The indicator light lights up red.
CHARGER
The
CHARGE STATUS
SK
the charge status.
SL
The
ENERGY MANAGER
red.
ET
50 %
The indicator light lights up green.
LT
The
CHARGE STATUS
LV
The
DOMESTIC CONNECTION
lights up yellow.
RO
The
CHARGE STATUS
BG
The DOMESTIC CONNECTION
flashes yellow.
MK
44
Meaning
button lights up red. The protective conductor is
interrupted/not present
indicator light
button lights up red. Overvoltage
indicator light
button lights up red. Overload
button lights up red. Relay fault
button lights up red. Self-test failed
button pulses red. Load cycle error
button in accordance with PLC or energy manager connec-
tion error
indicator light lights up
button lights up red. Infrastructure plug overtemper-
ature
indicator light
button lights up red. Undervoltage/invalid mains
frequency.
indicator light
Remedy
e Disconnect and re-connect the power plug.
e Non-earthed mains supply systems (e.g. IT networks) only: If neces-
sary, charge the vehicle with protective conductor monitoring
deactivated.
f Refer to chapter "Deactivating ground monitoring" on page 39.
e Only earthed mains supply systems: Have the control unit checked
by a qualified specialist workshop/Porsche partner. Have the mains
supply/domestic connection checked by a qualified electrician.
e Disconnect and re-connect the power plug.
e If this does not remedy the fault, have the domestic installation
checked by a qualified electrician.
e Disconnect and re-connect the power plug.
e If this does not remedy the fault, have the domestic installation
checked by a qualified electrician.
e Disconnect and re-connect the power plug.
e If this does not remedy the fault, have the domestic installation
checked by a qualified electrician.
e Disconnect and re-connect the power plug.
e If this does not remedy the fault, have the domestic installation
checked by a qualified electrician.
e The charger is defective and must not be operated. Visit a qualified
specialist workshop/Porsche partner.
e During initial operation, restart the charger and repeat start-up.
Check the connection to the PLC network. Check the connection to
the energy manager.
e The device has switched off due to overtemperature. Wait until the
normal temperature is reached again. If necessary, protect the
charger from direct sunlight.
e The charging process was interrupted. Wait. Do not take any action.