Porsche Mobile Charger Plus Manual De Instalación Y De Instrucciones página 44

Operating Manual
e By resetting the charger to the factory settings,
DE
the initial password is reactivated. However, this
will cause all the settings to be reset to the
EN
factory settings.
FR
f Refer to chapter "Private mode/open mode" on
IT
page 42.
Serial number of the charger
ES
The serial number of the charger can be found in the
PT
following places:
– In the letter containing access data after the
NL
designation Serial number
SV
– On the identification plate (on the back of the
control unit) after the abbreviation SN
FI
– In the web application: Settings > Maintenance >
DA
Device information
NO
Private mode/open mode
EL
The charger is configured to open mode upon
delivery. The energy manager is thus automatically
CZ
detected and connected in the home network.
HU
It is recommended to switch to private mode
following initial operation.
PL
Activating private mode
HR
1. Navigate to Connections > Energy manager in
the web application.
SR
2. Activate Secure mode.
SK
To connect the energy manager in private mode, the
SL
web application must be confirmed.
f Refer to chapter "Establishing a connection in the
ET
web application of the charger" on page 41.
LT
Resetting to factory settings
LV
All your settings will be deleted if you activate this
RO
function. Moreover, all passwords will be reset to the
initial passwords indicated in the letter containing
BG
your access data.
MK
42
Information
This function is deactivated as standard in the
charger. In order to execute this function in the
charger, it must be enabled in the web application
(Settings > System > Allow reset to factory
settings).
1. Press and hold the
CHARGE STATUS
-
the simultaneously for
MULTI FUNCTION BUTTON
5 seconds.
The indicator light flashes white when
CHARGER
you do so.
2. As soon as the indicator light stops
CHARGER
-
flashing, release the
MULTI FUNCTION BUTTON
and keep the CHARGE STATUS button pressed for
2 seconds.
-
3. Press and hold the
MULTI FUNCTION BUTTON
for 5 seconds.
AGAIN
The indicator light flashes white when
CHARGER
you do so.
The charger is reset to the factory settings. In the
meantime, the indicator lights light up green.
The device is ready for operation once the self-
test has been completed successfully.
Resetting to factory settings is also possible via the
web application or at a qualified specialist workshop.
Porsche recommends a Porsche partner as they have
trained workshop personnel and the necessary parts
and tools.
f For information on the web application, see the
manual at https://www.porsche.com/interna-
tional/aboutporsche/e-performance/help-and-
contact/
If you require a different language, please select
the appropriate website for your country.
Malfunctions
The charger indicates faults and malfunctions by the
indicator coming on or flashing red or yellow.
NOTICE
e If a fault persists or recurs, disconnect the charger
from the mains supply and contact a qualified
button and
electrician. Porsche recommends a Porsche
partner as they have trained workshop personnel
and the necessary parts and tools.
f Refer to chapter "Control Unit" on page 36.
Damage to the charger