Chemical Injection Supply System - Alliance Laundry Systems UW35PV Instalación/Mantenimiento

Installation
Chemical Injection Supply
System
WARNING
Wear eye and hand protection when
handling chemicals; always avoid direct
contact with raw chemicals. Read the
manufacturer's directions for accidental
contact before handling chemicals. Ensure
an eye-rinse facility and an emergency
shower are within easy reach. Check at
regular intervals for chemical leaks.
Injection Point
PVC Pipe
32
SW016
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Undiluted chemical dripping can damage the
washer-extractor. Therefore, all chemical
supply dispenser pumps should be mounted
below the washer's injection point. All
dispenser tubing should also run below the
injection point. Loops do not prevent drips if
these instructions are not followed. Failure to
follow these instructions could damage the
machine and void the warranty. Figure 11
shows a typical Chemical Injection Supply
System.
Chemical Dispenser
Pump Outlet
Figure 11
P040IE3A
F232084