Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Chemical Injection Supply System
WARNING
Wear eye and hand protection when
handling chemicals; always avoid direct
contact with raw chemicals. Read the
manufacturer's directions for accidental
contact before handling chemicals.
Ensure an eye-rinse facility and an
emergency shower are within easy reach.
Check at regular intervals for chemical
leaks.
1
Chemical Dispenser Pump Outlet
2
Supply Dispenser
1
Chemical Dispenser Pump Outlet
2
Supply Dispenser
F232102
1
3
TYPICAL INJECTION SYSTEM FOR 135 POUND CAPACITY MODELS
1
3
TYPICAL INJECTION SYSTEM FOR 250 POUND CAPACITY MODELS
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Undiluted chemical dripping can damage the washer-
extractor. Therefore, all chemical supply dispenser
pumps should be mounted below the washer's
injection point. All dispenser tubing should also run
below the injection point. Loops do not prevent drips if
these instructions are not followed. Failure to follow
these instructions could damage the machine and void
the warranty. Refer to Figure 19 for a typical chemical
supply injection system on 135 pound capacity
models. Refer to Figure 20 for a typical chemical
injection supply system on 250 pound capacity
models.
2
3
PVC Pipe
Figure 19
3
PVC Pipe
Figure 20
U087I
2
R010I
Installation
U087I
R010I
35
Capítulos
Tabla de contenido
