Operation; Uw Models With S-Computer Or V-Computer; Start-Up; Opening Door - Alliance Laundry Systems UW100VV Suplemento De Instalacion/Operacion

UW Models with S-Computer or
V-Computer

Start-Up

Turn on the main power source (circuit breaker or
cut-off switch on the wall).

Opening Door

Use left hand to press and hold the Door Unlock
button located on the lower right front of the control
panel. Refer to Figure 5.
Figure 5
Use right hand to turn door handle clockwise, and
swing the door left to open. Refer to Figure 6.
Figure 6
F232156

Operation

MD003J
MD004J
MD004J
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Installation/Operation Supplement

Loading

CAUTION
Be careful around the open door,
particularly when loading from a level below
the door. Impact with door edges can cause
personal injury.
Load the machine to full capacity whenever possible.
DO NOT OVERLOAD.
Close door and turn handle counterclockwise. Door
will lock automatically.
CAUTION
Check the door safety interlock daily before
the machine is placed in operation.
NOTE: When washing items which may
disintegrate or fragment, such as mop heads or
sponges, use laundry nets to prevent drain
blockage.

Supply Dispenser

Add detergent to supply dispenser.
Liquid supplies can be injected directly into the supply
dispenser by an external chemical supply system.
NOTE: Supply dispenser compartment cups must
not be removed when an external chemical
injection supply system is attached to the washer-
extractor.

Cycle Selection

NOTE: Press keys at their centers just hard enough
to activate them.
Press the Up or Down key until the desired cycle
number is displayed. Press the Start key to start the
cycle.
To display the temperature of the water while cycle is
running, press the Up key. To display the number of
the cycle in progress, press the Start key.
Cycle is complete when display reads "donE".
NOTE: A cycle can be stopped at any time by
pressing the Stop key.
SW025
SW024
23