Care Of Stainless Steel - Alliance Laundry Systems UW35PV Instalación/Mantenimiento

Care of Stainless Steel

• Remove dirt and grease with detergent and
water. Thoroughly rinse and dry after
washing.
• Avoid contact with dissimilar metals to
prevent galvanic corrosion when salty or
acidic solutions are present.
• Do not allow salty or acidic solutions to
evaporate and dry on stainless steel. Wipe
clean of any residues.
• Rub in the direction of the polish lines or
"grain" of the stainless steel to avoid
scratch marks when using abrasive
cleaners. Use stainless steel wool or soft,
non-metal bristle brushes. Do not use
ordinary steel wool or steel brushes.
• Remove discoloration or heat tint from
overheating by scouring with a powder or
by employing special chemical solutions.
F232084 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Maintenance
• Do not leave sanitizers or sterilizing
solutions on stainless steel equipment for
prolonged periods of time.
• When an external chemical supply is used,
ensure no siphoning of chemicals occurs
when the washer-extractor is not in use.
Highly concentrated chemicals can cause
severe damage to stainless steel and other
components with the machine. Damage of
this kind is not covered by the
manufacturer's warranty. Locate the pump
below the washer-extractor's injection
point to prevent siphoning of chemicals
into the machine.
• If the stainless steel appears to be rusting
the source of the rust may actually be an
iron or steel part not made of stainless
steel, such as a nail or screw. Tip: Paint all
carbon steel parts with a heavy protective
coating. Stainless steel fasteners should be
used whenever possible.
47