2-Thread Spreader Installation - Texi Integra 5 Manual Del Usuario

EN

2-THREAD SPREADER INSTALLATION

NOTE: TURN OFF THE POWER.
Sewing 2-thread, 3-thread, 4-thread, must be
installed 2-thread spreader. The 2-thread spreader is
put in the accessories box.
The hand wheel rotates along the direction of the
arrow until upper looper is on the right side of upper
knife.
Insert the hinge A in the 2-thread spreader into the
hole in the upper looper.
Turn the 2-thread spreader to the left and press the
upper part slightly back. The tip of the 2-thread
spreader will be locked in the hole of the upper
looper. With the reverse step, you can remove the
2-thread spreader.
102 Texi Integra 5