Thread Cutter; Disconnecting / Activating The Upper Knife - Texi Integra 5 Manual Del Usuario

4.
Lower the presser foot holder to lock the foot in
place.
As shown in the figure, the dial (See fig "A") on the
presser foot is used to indicate the range of motion of
the needle.

THREAD CUTTER

DISCONNECTING / ACTIVATING THE UPPER KNIFE

NOTE: TURN OFF THE POWER.
Sewing fabric is finished, continue sewing as a 15-20
cm thread chain, and then thread chain to the thread
cutter, cut the thread chain.
ACTIVATING UPPER KNIFE
Push the upper knife arm to the right and turn the upper knife
back to its original position. Turn off the looper cover, then
install cloth waste box.
Texi Integra 5
DISCONNECTING
UPPER KNIFE
By turning the handwheel,
raise the upper knife to the
highest position, then raise
the presser foot. Turn the
upper knife anti-clockwise
until it is stuck in the notch.
EN
101