2-Thread Crimped Overlock; Machine Maintenance; Oiling The Machine - Texi Integra 5 Manual Del Usuario

2-THREAD CRIMPED OVERLOCK

MACHINE MAINTENANCE

CLEANING THE MACHINE
Remove the cloth waste cover,
open the looper cover, put the
upper knife in the non working
position, remove the presser
foot, clean the , the upper k
Needle plate nife, the lower
knife and the looper area with
the brush in the accessory box.
YELLOW BLUE GREEN
N
Note: Use the 2-thread spreader to help sewing
If the lower looper thread (purple) is too loose. Adjust
the right needle tension knob (blue) to lower value or
adjust the lower looper thread tension knob (purple) to
higher value.
If the lower looper thread (purple) is too tight. Adjust
the right needle thread tension knob (blue) to higher
value or adjust the lower looper tension knob (purple)
to lower value.
OILING THE
MACHINE
Lubricate the
machine according
to the picture after
cleaning.
NOTE: Turn off the power before operation.
Texi Integra 5
PURPLE RED
N
CLEANING RUBBER BASE
Periodically clean the sucker
with alcohol to ensure the
stability of the machine.
EN
119