Introduction
Introduction
The Bluetooth-enabled WristOx
Model 3150, is a small, wrist-worn device that displays,
2,
measures, and stores patient SpO
and pulse rate data. The device includes a Bluetooth radio
2
with a range (spherical radius) of approximately 100 meters (328 feet).
The device ships ready to use in Spot Check turn on mode. In Spot Check turn on mode,
inserting a finger in the sensor automatically turns the device on. Approximately 10 seconds
after the finger is removed, the device enters Standby mode.
®
Advanced memory and programming features are available with Nonin's nVISION
software
(version 6.3 or greater). See the "nVISION Software" section to learn more about using the
device with nVISION.
NOTE: If using the WristOx
Model 3150 with 3rd party software, please disregard
2,
nVISION information.
Unpacking the WristOx
Model 3150
2,
The WristOx
Model 3150, standard or starter kit includes the items listed below. Once the
2,
shipping carton is unpacked, verify these items were received. Contact the carrier immediately
if the shipping carton is damaged.
Standard Kit
• Model 3150, WristOx
Pulse Oximeter
2
• Model 8000SM-WO2, reusable soft sensor
• 1 wristband
• 2 AAA (1.5 volt) alkaline batteries
• Operator's manual (CD)
• USB driver software (on operator's manual CD) – required to use the PC USB interface cable
Starter Kit
A starter kit is required to configure the device and download data to a PC. The starter kit
consists of the standard kit, plus:
• 3 wristbands
• nVISION SpO
data management software (CD)
2
• Model 3150SC, PC USB interface cable
Batteries
The device uses 2 AAA batteries.
With new alkaline batteries, battery life is approximately 53 hours (minimum) when not
connected to a Bluetooth device. When connected to a Bluetooth device, battery life will vary
depending on class of operation. See "Specifications" for detailed battery life information.
10