NuWave Bravo XL El Manual Del Propietario página 11

OPERATING INSTRUCTIONS (Continued)
SEAR:
Default — 450°F, 5 minutes.
Sear 1: Sear 1 will ALWAYS be the stage BEFORE the regular cooking stage.
Press "ON/OFF".
1.
Press "SEAR" once. The LED display will show "450F", TEMP and SEAR
2.
will be backlit, and "1" will flash.
Press "START/PAUSE". The LED display will show SEAR 1, ":" will flash,
3.
and TIME, TOP, and BTM will be backlit.
The unit will "SEAR" at 450°F for 5 minutes (SEAR 1), cook at 350°F for 10
4.
minutes (default) the unit will beep 3 times and "End" will be displayed on
the LED screen, indicating cooking is complete.
NOTE:
Regular cooking stage temperature and time can be adjusted by turning the
"START/PAUSE" knob after Step #1.
Default — 450°F, 5 minutes.
Sear 1 2:
Press "ON/OFF".
1.
Press "SEAR" twice. The LED display will show "450F", TEMP and SEAR 1
2.
will be backlit, and "2" will flash.
Press "START/PAUSE". The LED display will show SEAR 1 and ":" will
3.
flash. TIME, TOP and BTM will be backlit.
The unit will "SEAR" at 450°F for 5 minutes (SEAR 1), cook at 350°F for
4.
10 minutes (default), and "SEAR" again at 450°F for 5 minutes (SEAR
2). SEAR 2 and ":" will flash. Then unit will beep 3 times and "End" will be
displayed on the LED screen indicating cooking is complete.
Sear 2: Default — 450°F, 5 minutes.
Press "ON/OFF".
1.
Press "SEAR" three times. The LED display will show "450F", TEMP and
2.
SEAR will be backlit, and "2" will flash.
Press "START/PAUSE".
3.
The unit will cook at 350°F for 10 minutes (default) and then unit will "SEAR"
4.
at 450°F for 5 minutes (SEAR 2). Unit will then beep 3 times and "End" will
be displayed on the LED screen, indicating cooking is complete.
NOTE:
Press "SEAR" four times to clear out the sear function.
•
Maximum time for all sear functions is 5 minutes.
•
Maximum temperature for all sear functions is 450°F.
•
20
Owner's Manual
OPERATING INSTRUCTIONS (Continued)
STAGE: Maximum of 5 stages can be programmed.
Press "ON/OFF". LED display will show "350F".
1.
Press "STAGE".
2.
The LED display will show TEMP and STG 2.
•
Press "TEMP/TIME". Turn "START/PAUSE" to adjust this stage's cooking
•
temperature and time.
Press "STAGE" again to program another stage of cooking.
3.
The LED display will show TEMP and STG and "3" will be displayed
•
above STG.
Press "TEMP/TIME". Turn "START/PAUSE" to adjust this stage's cooking
•
temperature and time.
Press "START/PAUSE" to begin cooking following the stages programmed.
4.
WARM, SEAR 1, SEAR 2, AND DELAY WITH STAGE COOKING
EXAMPLE: DELAY for 1 hour » SEAR 1 350°F for 4 minutes » Cook stage 1
at 325°F for 20 minutes » cook stage 2 at 300°F for 40 minutes » cook stage
3 at 350°F for 10 minutes » SEAR 2 at 400°F for 5 minutes » WARM at 125°F
for 30 minutes.
Press "ON/OFF". Adjust temperature to 325°F by turning "START/PAUSE".
1.
LED display will show "325F" and TEMP. Press "TEMP/TIME". Adjust time
to 20 minutes by turning "START/PAUSE". LED display will show "00:20"
and TIME.
Press "PROG" and "LIGHT". Adjust time to 1 hour by turning "START/
2.
PAUSE" knob. LED display will show "01:00", DLY, and TIME.
Press "SEAR" one time. Adjust temperature to 350°F by turning "START/
3.
PAUSE". Press "TEMP/TIME". Adjust time to 4 minutes by turning "START/
PAUSE". LED display will show "01:00", DLY, TIME, and SEAR and "1"
will flash.
Press "STAGE". Adjust temperature to 300°F by turning "START/PAUSE" knob.
4.
Press "TEMP/TIME". Adjust time to 40 minutes by turning "START/PAUSE".
LED display will show STG 2, "00:40", TIME, TOP, BTM, and the fan icon.
Press "STAGE" again. Adjust temperature to 350°F by turning "START/
5.
PAUSE". Press "TEMP/TIME" and adjust time to 10 minutes by turning
"START/PAUSE". LED display will show STG 3, "00:40", TIME, TOP, BTM,
and the fan icon.
Press "SEAR" again. Adjust temperature to 400°F by turning "START/
6.
PAUSE". Press "TEMP/TIME". Adjust time to 5 minutes by turning "START/
PAUSE". LED display will show SEAR 1, "00:05", and TIME, and "2"
will flash.
21
Owner's Manual