Reverse Stitching; Turning Corners; Straight Stitch - Texi Joy 48 Manual De Operación

REVERSE STITCHING

Reverse stitching is used for reinforcing the ends of the seams.
1. Place the fabric in position where back stitching is to be made and lower the presser foot.
2. Press reverse stitch lever and sew 4-5 stitches.
3. Release reverse stitch lever and press foot control to sew forward.
4. When you reach the end of a seam, press reverse stitch lever and sew 4-5 reverse stitches.

TURNING CORNERS

1.
Stop the machine when you reach a corner
2. Lower needle into the fabric
3. Raise the presser foot.
4. Use the needle as a pivot and turn fabric.
5. Lower the presser foot and resume sewing.

STRAIGHT STITCH

Stitch Name
STRAIGHT
STITCH
STRAIGHT
STITCH
STRAIGHT
STITCH
1.
Check presser foot (universal purpose presser foot).
2.
Push needle position button to move needle to its highest position.
3.
Place the fabric under the presser foot. Hold upper and bobbin thread loosely
4.
Lower the presser foot lever and start sewing.
5.
Regulate the speed while sewing.
6.
When you reach the end of seam, press the reverse lever to sew 3-4 stitches.
7.
Raise the presser foot lifter.
8.
Turn the handwheel toward you to bring the needle to it's highest position. Pull the fabric out
from under the foot to the back of the machine. Cut the threads on the thread cutter.
Number Recommended
of stitch stitch width
01 0.0
00 2.5
02 5.0
Texi Joy 48
Recommended Type of the
stitch lenght presser foot
2.5 Universal
2.5 Universal
2.5 Universal
EN
75