Extracting Hot Water/Tea; Turning Off The Machine - Bezzera ARCADIA DE BREWING PROFILE Manual De Instrucciones

When is pressed after the container has
been emptied or after 180 seconds, the display
shows:
the peristaltic pump is deactivated; the machine
buzzer rings three times, then twice, and finally
once continuously until the end of the clean; the
steam solenoid valve is activated and the peristal-
tic pump is activated at maximum output for 10
seconds. At the end of the cleaning procedure,
the display returns to the following screen:
Press to return to the main menu
Attention: If any type of detergent has
been used, repeat the entire cleaning
procedure using drinking water at a
maximum temperature of 50°C (ap-
prox. 1 litre).

5.5 Extracting hot water/tea

1) Place the container under the hot water tap
(Fig. 01; pos. 4).
2) Press the key (Fig. 06; pos. "i", "l" or "m") to
extract the amount of water required.
Each key (Fig. 06; pos. "i", "l" or "m") can be
assigned a different temperature profile and
quantity of water. Pressing
will show:
MOD.
press the display in the part showing the key to be
programmed
Press
the quantity of cold water that needs to be mixed
and then
10-second test to dispense tea will start. The dis-
play shows the temperature set.
The test can be stopped by pressing one of the keys
Press
amount is reached press
Press
the procedure for all keys. Press
to the main menu.

5.6 Turning off the machine

1) Close the water supply tap.
the display
2) Press the switch (Fig. 01; pos. 9) in pos. "OFF"
(light
47
BEZZERA ARCADIA BREWING PROFILE
or or
and then "
to test the set temperature. A
or or
to start dosing; when the desired
to assign the set profile and repeat
Warning: Do not touch the spout di-
rectly because it is hot.
off).
" or " " to change
to return