Mettler Toledo IND570 Manual De Instalación página 71

5. Take the black and drain wires and crimp on one of the included ring terminals.
6. Feed the cables into the enclosure through the opening from which the cable gland was
7. Insert the grommet into the opening in the terminal, then screw on the gland clamp. Note that
The cable is now ready for connection and grounding.
2-38 METTLER TOLEDO IND570 Terminal Installation Manual
Figure 2-72: Ring Terminal Crimped to Black and Drain Wires
removed.
the plastic grommet is keyed so it only fits into the gland in specific positions. Tighten the
clamp to 40 lb/in (5 Nm) to secure the cable.
Figure 2-73: Cables Entering Enclosure
Figure 2-74: Cable Gland Installed
30205319 | 11 | 07/2019