Mettler Toledo IND570 Manual De Instalación página 55

2.4.5.4.1. SICSpro Cable-Free Floor Scale Installation
When installing a Bluetooth-connected Cable-Free Scale Base (CFS), take care to place the
IND570's attached Bluetooth module (provided with the scale base) so that it has a direct line of
sight to the CFS. To pair the terminal with a CFS, follow this procedure:
1. With the terminal powered down, connect the Bluetooth module to the SICSpro port.
2. Power on the terminal.
3. In setup, access Scale > Type. Select SICSpro as the type, then press the Bluetooth softkey
4. The BLUETOOTH screen will appear, displaying a single field – Platform MAC Address. If no CFS
5. At the CFS, unscrew two bolts to remove the access panel and view the CFS's Bluetooth
2-22 METTLER TOLEDO IND570 Terminal Installation Manual
Refer to chapter 1, Introduction, for a list of compatible SICSpro scale bases.
Figure 2-34: SICSpro Connector Location on the Harsh (left) and Panel (right) Enclosures
Only IND570 terminals running firmware 2.00.0086 or later are compatible with the ACW520
option.
Figure 2-35: Bluetooth Module connected to IND570
has been paired, this field will be blank.
module.
.
30205319 | 11 | 07/2019