Mettler Toledo IND570 Manual De Instalación página 64

5. Adjust the lengths of the braided cable and outer drain wire as necessary, and tighten the
6. Wrap the free end of the braided grounding cable about two turns around the POWERCELL
7. Install the screw clamp (from the Vehicle Scale lightning protection kit) over the braided cable
2.4.5.6.3. Internal Grounding and Wiring Connection of POWERCELL Cable, Harsh Enclosure
The terminal cannot be used with cable lengths exceeding those given in Table 2-6, or with more
than 14 POWERCELL cells.
30205319 | 11 | 07/2019
clamp on the ground lug.
cable. Adjust the length of the braided cable and cut if necessary.
and tighten to secure it in place.
Screw clamp
Figure 2-57: Braided Cable Wrapped Around PDX Cable
Terminal
CANH
- -
CANL
+24V
GND
Table 2-5: PDX Cable Color Code
Description
CANbus Dominant High
Not Used - Empty
CANbus Dominant Low
PDX Network Power Supply
PDX Network Ground
METTLER TOLEDO IND570 Terminal Installation Manual
Wire Color
White
None
Blue
Red
Black
2-31