KEB COMBIVERT F5 Serie Manual De Instrucciones página 96

Operation of the Unit
Source of rotation
direction
GB
GB
GB- 26
The source rotation setting and the mode of evaluating the rotation setting
is defined with this parameter (Enter-Parameter). With CP.34 one does
not modify the rotation source of the fixed frequencies (CP.19... 21).
Value Function
0/1 Only application mode
2 Setting by way of terminal strip forward/reverse; negative set
values are set to zero (factory setting)
3 Setting by way of terminal strip forward/reverse; the signs of
the setpoint values have no effect on the direction of rotation
4 Setting by way of terminal strip run/stop (X2A.14) and
forward/reverse (X2A.15); negative values are set to zero
5 Setting by way of terminal strip run/stop (X2A.14) and
forward/reverse; the signs of the setpoint values have no
effect on the direction of rotation
6 Set value dependent, positive value - clockwise rotation;
negative value-counterclockwise rotation; with set value "0" it
is switched into status "Low speed" (LS)
7 Set value dependent, positive value - clockwise rotation;
clockwise rotation is indicated
8/9 Only application mode
Set value
0-limited
100%
(Value 2 and 4)
-100%
-10V
Set value
absolute
100%
(Value 3 and 5)
-100%
-10V
Adjustment range:
Resolution:
Factory setting:
Note:
intern
internal
10V
extern
external
100%
-100%
intern
internal
10V
extern
external
100%
-100%
0...9
Enter-Parameter
1
2