Passwort Input; Operating Display - KEB COMBIVERT F5 Serie Manual De Instrucciones

Operation of the Unit
2.3 Password Input
GB
GB

2.4 Operating Display

Actual frequency display
Set frequency
Inverter status display
GB- 12
Ex works the frequency inverter is supplied without password protection,
this means that all changeable parameters can be adjusted. After
parameterizing the unit can be barred against unauthorized access
(Passwords: see last but one page). The adjusted mode is stored.
Barring the
CP-Parameter
Enabling the CP-
Parameter
The parameters below serve for thecontrolling of the frequency inverter
during operation.
Display of the actual output frequency with a resolution of 0.0125 Hz. The
operator displays additionally „noP" and „LS" if the control release or the
direction of rotation are not switched (see CP.3). The rotation of the
inverter is indicated by the sign.
Examples:
Display of actually set frequency. The indication is done in the same
manner as at CP.1. For control reasons the set frequency is displayed
even if control release or direction of rotation are not switched. If no
direction of rotation is set, the set frequency for clockwise rotation
(forward) is displayed.
The status display shows the actual working conditions of the inverter.
Possible displays and their meanings are:
"no Operation" control release not bridged, modulation
switched off, output voltage = 0 V, drive is not controlled.
"Low Speed" no rotation preset, modulation switched
off, output voltage = 0 V, drive is not controlled.
Password
FUNC
Password
FUNC
Output frequency 18.3 Hz, rotation forward
Output frequency 18.3 Hz, rotation reverse
ENTER
UP
ENTER
UP