Installation And Connection; Control Circuit General; Assignment Of Terminal Strip X2A - KEB COMBIVERT F5 Serie Manual De Instrucciones

1. Installation and Connection

1.1. Control Circuit
COMPACT /
GENERAL
1.1.1 Assignment of
Terminal Strip X2A
PIN Function
1 + Set value input 1
GB 2 - Set value input 1
3 + Analog input 2
4 - Analog input 2
5 Analog output 1
6 Analog output 2
GB
7 +10V Output
8 Analog Mass
9 Analog Mass
10 Fixed frequency 1
11 Fixed frequency 2
12 External fault
13 DC-braking
14 Forward
15 Reverse
16 Control release / Reset
17 Reset
18 Speed dependent
19 Ready signal
20 24V-Output
21 20...30V-Input
22 Digital Mass
23 Digital Mass
24 Relay 1/NO contact
25 Relay 1/NC contact
26 Relay 1/switching contact RLC
27 Relay 2/NO contact
28 Relay 2/NC contact
29 Relay 2/switching contact FLC
GB- 4
1 2 3 4 5 6 7 8 9
Name Description
AN1+ Difference voltage
AN1- 0...±10 VDC ^ 0...±CP.11
AN2+ input without function in CP-mode
AN2-
ANOUT1 Analog output of the real speed
0...±10 VDC ^ 0...±100 Hz
ANOUT2 Analog output of the apparent current
0 ... 10 VDC ^ 0 ... 2 x I
CRF Reference voltage for set value poti
COM Mass for analog in- and outputs
COM Mass for analog in- and outputs
I1 I1+I2 = fixed frequency 3 (default: 70 Hz)
I2 no input = analog set value
I3 Input for external fault stopping mode
I4 Activates the DC-braking
F Preset rotation;
R Forward has priority
ST Power modules are enabled;
Error Reset at opening
RST Reset; only when an error occurs
O1 Transistor output switched at factual = fset
O2 Transistor output switched, as long as no error occurs
U Approx. 24V output (max.100 mA)
out
U
Voltage input for external supply
in
0V Potential for digital in-/outputs
0V Potential for digital in-/outputs
RLA Relay output; fault relay (default);
RLB Function can be
changed with CP.31
FLA Relay output;
FLB frequency dependent switch (default);
Function can be changed with CP.32
X2A
10 11 12 13 14 15 16 17 18 19 20 21 22 23
resolution:
12 Bit (B-housing: 11 Bit),
scan time: 1 ms
Voltage range: 0...±10V
Ri=100 Ohm, resolution: 12 Bit
PWM frequency: 3,4 kHz
filter response 1. order: 178 Hz
N
+10 VDC +5% / max. 4 mA
Ri = 2,1 kOhm
scan time: 1 ms
max. 30 V DC, 0,01...1 A;
24 25 26 27 28 29