Cressi Archimede II Manual De Instrucciones página 182

2 dive time, shown by the "DIVE T" icon, given by the timer
in minutes and seconds.
3 maximum depth
given in meters (m) or feet (ft.), shown by the
"MAX" icon.
4 segmented ascent rate indicator
5 icon of maximum depth alarm (if ON – please see 2.5.1)
6 computing program icon
Additional important information may be obtained by depres-
sing button A ( ) depressed during the dive, representing (pic- i
ture 23):
1 Maximum depth reached during the dive, given in meters
(m) or feet (ft.);
2 Current temperature, expressed in °C or °F ;
by keeping button B depressed it is possible to read the
time in hours and minutes. The UFDS display will show
( ) (picture 24).
WARNING: The computer will not compute any saturation
and de-saturation computation during the remaining 48
hours elapsing from the end of the
m
DANGER: Should you decide to reset the instrument by
pressing button RESET on the computer's back, the nitro-
gen memory will be cancelled. Therefore, the instrument will
not be able to compute a following dive. Never use this
function at least 48 hours after the last diving activity.
reached during the
program dive.
Related topics:
• 2.4. - program parameters setting (depthometer/timer)
dive • 2.3. - Parameters setting
• 2.5.1. - Maximum depth alarm
• 2.5.2. - Date and time adjustment
• 2.5.3. - Units of measure setting
• 4.1. - Data processing
• 4.1.1. - Surface interval (
• 4.1.2. - Logbook
182
, , )