While Diving: Program Dive; Air Dive - Cressi Archimede II Manual De Instrucciones

3. - program.
Archimedes II computer offers two
grams; for air ( program) and for nitrox mixtures or
EAN (Enriched Air Nitrox) dives. Archimedes II allows for use
with up to two different nitrox mixtures during the same dive.
NOTE: Archimedes II computer is set at the factory on
program, with the primary mixture's (Mix 1) O2
value on 21% and PO2 on 1.4. The second mixture (Mix
2) is set at the factory off. Each manual variation of the
manufacturer's values relating to Air program will start
Archimedes II Nitrox computation program.

3.1. - AIR DIVE.

Archimedes II computer starts automatically the "Dive" pro-
gram at a depth superior to (ft. 5). During a curve dive the dis-
play will show the following information (picture 10):
1 current depth value, in meters (m) or feet (ft.)
2 no decompression time still available is shown by the
"NDL" - (No Decompression Limit) icon
3 maximum depth reached during the dive
displayed in meters (m) or in feet (ft.), shown by the
"MAX" icon
4 time spent diving, shown by the "DIVE T" icon
indicator of segmented surfacing speed
5
6 graph of nitrogen amount absorbed during the dive
7 graph representing CNS O2 toxicity level (see chapter
3.3.4)
8 Automatic indicator of altitude level
9 Icon of maximum depth alarm (if switched ON – see 2.5.1)
10 indicator of Nitrox mixture(s) dive
computing pro-
11 MIX1 or MIX2 icons identifies which Nitrox mixture is being
considered by the computer to make its computations
12 ( ) and ( ) icons, that is "Info" (button A) and back-illu-
mination (button C).
Further important information are obtained by keeping pres-
sed button A (
1 current PO2;
2 oxygen percentage of the selected mixture (Air if FO2=21%);
3 maximum depth reached during the dive, in meters (m) or
feet (ft.);
4 current temperature, expressed in °C or °F
The UFDS display show (
NOTE: When the computer is used for air dives, it is not
necessary to carry out any FO2 change or setting before
the following dive.
During your diving activity, light condition may not allow easy
reading of the display, therefore, it is possible to switch on its
back-illumination by depressing button C ( ). The display's
back-illumination will last about 5 seconds and may be repea-
ted any time you want. The battery consumption is minimal
when the back-illumination is activated.
Related topics:
• 2.3.
• 3.4.1.
• 3.3.3. - Mixture changing by diving
• 3.3.4 - CNS toxicity display.
• 3.3.5. - PO2 alarm.
173
) during the dive, that is (picture 11):
).
– Dive parameters setting
– Ascent rate.