Idiomas disponibles
Idiomas disponibles
William - PL72
age referring to the dose per 2 coffees, the grinding time programmed and the
image of the grinder in action.
The grinder grinds the dose according to the set time. Wait until the grinding is
over, the message "OK" and then the grinder icon will appear on the LCC (9)
display. Remove the filterholder from the fork (8).
E.6 To grind any quantity of coffee continuously, press the switch
keep it pressed, the image referring to the "adding coffee" function will appear
12
on the LCC (9) display.
E.7 Check the grinding and the quantity per dose.
Note.
pressing the switch (4).
Caution.
pressed: maximum time 19 seconds); stopping the grinding once started before
the set time; adding coffee once the grinding is over.
E.8 Eventual coffee rests can be removed from the removable catch tray (12)
just pulling it. The tray (12) is fixed with magnets: removing and placing it back
is really easy and practical!
F
Regulate the chute
F.1 The grinder is equipped with an innovative adjustable coffee chute (10) that
precisely directs the coffee into any filterholder. If the ground coffee is not deliv-
ered in the center of your filterholder, move the internal part of the chute back-
wards/onwards with your fingers in order to center the fall of the ground coffee
into your filterholder.
G
Regulate the grinding
Note.
the grinding of most types of coffee blends, available in the market.
Caution.
grinding.
G.1 Rotate the grinding wheel (3) to change the coffee granulometry. Rotate
the wheel clock-wise (towards the small points) to obtain a finer grinding, anti-
clock-wise for a coarser grinding.
Note.
Once the grinding has started, you can stop it before the set time,
The switch
The factory setting of the grinder is a medium grinding size, ideal for
Regulate the grinding ALWAYS and ONLY while the grinder is
Micrometric regulation does not require any blockage.
(4) is for: continuous grinding (keep it always
(4) and
